Wieland Kupral Kft.
Kösöntyü u. 4.
1037
Budapest
Hungary
(UTC+1)
Wieland Kupral Kft.
The trading company Wieland Kupral Kft. was founded in 1993 as a subsidiary of Wieland Austria GmbH and has been part of the Wieland Group since 1999. Semi-finished and finished products made of more than 20 alloys are stored in Budapest.
- Cutting service (bandsaw and circular saw machines)
- Short delivery times
Organization
Business hours
Monday - Thursday
7:30 am - 3:30 pm
Friday
7:30 am - 1:30 pm
7:30 am - 3:30 pm
Friday
7:30 am - 1:30 pm
Goods acceptance times
Monday - Thursday
7:30 am - 3:30 pm
Friday
7:30 am - 1:30 pm
7:30 am - 3:30 pm
Friday
7:30 am - 1:30 pm
1500
more than to delivered products
1500
m² storage capacity
15
employees
Products
Our products at a glance
Product categories
Efficient minimal quantity lubrication by plunger rod.
- The minimal quantity lubrication is applied through lubrication ring on plunger rod
- Depending on the required lubricant (viscosity) our devices can be equipped with the appropriate components
- A wide range of lubricants from various manufacturers can be applied
CARO®LUB 2.1
- Developed for structural casting
- Improved casting quality
- Significantly lower emissions and pollution
- Optionally with remote maintenance
- For minimal quantity lubrication with low-viscosity lubricants
CARO®LUB 3.1
- Developed for structural casting
- Improved casting quality
- Significantly lower emissions and pollution
- Possibility of remote maintenance
- For minimum quantity lubrication with highly viscosity lubricants
- Individually adjustable lubricant distribution
- Exactly adjustable lubrication quantities in ml
CARO®LUB 4.0
- Developed for structural casting and industry 4.0
- For highly viscous lubricants used for minimal quantity lubrication
- Improved casting quality
- Significantly lower emissions and pollution
- Individually adjustable lubricant distribution
- Exactly adjustable lubricant quantities in ml
- Application of state-of-the-art and high-quality components from Siemens
data-controller="youtube-lazy-load" data-youtube-lazy-load-video-id-value="DQssWfXHJG4" data-youtube-lazy-load-autoplay-value="0"
>
width="1050" height="400" data-youtube-lazy-load-target="iframe"
class="border-0"
>
Made of high-performance alloys for longer lifetime.
- Multiple lifetime extension of shotsleeve
- Simple assembling and dismantling without mould changing
Product brochure CaroShotsleeve
CaroShotsleeve
- Lifetime extension due to sleeves and thermo regulation
- Specifically for low iron aluminum alloys
- Reduces pre-damage risk of hot aluminium
- Optional with quick change sleeve
Carosleeve
- Different alloys and treatments available
- Specifically for low iron aluminum alloys
- Very good wear resistance in filling-area (Hot Spot)
- Lifetime extension of shotsleeve
- Fast & easy assembly and dismantling at DCM
Services
- Advisory service, process development and designing
- Provider for die-casting technology e.g. plunger tips, plunger rods, quick-coupling systems, vacuum-casting for structural parts and magnesium parts
- Service center for reworking of shot sleeve and assembling
data-controller="youtube-lazy-load" data-youtube-lazy-load-video-id-value="DQssWfXHJG4" data-youtube-lazy-load-autoplay-value="0"
>
width="1050" height="400" data-youtube-lazy-load-target="iframe"
class="border-0"
>
Custom-fit in high-quality rods for any machine type, optional with quick coupling system
- Manufacture of plunger rods for all machine types
- Change from plunger rods with adapter to CaroTec and CaroVac system
- Optional with quick coupling unit
CaroRod with integrated lubrication in combination with CaroLub spraying devices enable:
- Improved casting quality
- Minimal lubricant consumption
- Significantly lower emissions
Product brochure CaroTec & CaroRod plunger rod system
Product brochure CaroVac & CaroRod plunger rod system
Guide elements on CaroRod
- For easy change of plunger tip and easy adjustment
- For safety when overriding the chamber
- Load relief of plunger tips and coupling
Services
- Service center for reconstruction and repair
- Advisory service, process development and designing
- System supplier in die-casting technology
data-controller="youtube-lazy-load" data-youtube-lazy-load-video-id-value="DQssWfXHJG4" data-youtube-lazy-load-autoplay-value="0"
>
width="1050" height="400" data-youtube-lazy-load-target="iframe"
class="border-0"
>
Optimizes the standard die casting
- Designed for flexible use on any DCM
- Suitable for standard and vacuum products (flexible ring system)
Advantages
- Easy changeover from solid tip to system plunger tip system
- Vacuum: Flexible change of glide bushing to circlips for vacuum application
- Can be fitted on existing plunger rods
- Proven ring system
- Closed pressure ring (prevents honing, no contact to shotsleeve)
- Soft Slide bushing in contact to shotsleeve
- Ring (spare parts) change in a few simple steps directly at the DGM
- Plunger tip change in a few steps due to bayonet lock (patented)
Product brochure CaroBull & CaroBull-V
Services
- Service center for plunger tip reworking and assembling
- Advisory service, process development and designing
- Comprehensive stock
data-controller="youtube-lazy-load" data-youtube-lazy-load-video-id-value="DQssWfXHJG4" data-youtube-lazy-load-autoplay-value="0"
>
width="1050" height="400" data-youtube-lazy-load-target="iframe"
class="border-0"
>
Solder fitting
For connoisseurs of the plumbing and heating trade, the Conex | Bänninger >B< is a trademark that has stood for safety, quality and innovative products since 1909.
Fittings made of copper from Conex | Bänniger of the 5000 series: this material is oxygen-free and contains a copper mass fraction of at least 99.90%. It has excellent soft and hard solderability.
Gunmetal fittings from Conex | Bänniger of the 4000 and 3000 series: the gunmetal alloy of the cast fittings fully complies with the requirements of the new EN 1982 and can therefore be used for drinking water in accordance with ÖNORM
B 5014-3. The alloy offers the highest possible protection and has good soft and hard solderability.
CONEX clamping ring connectors
CONEX clamping ring connectors belong to the group of metal-sealing smooth pipe connections and consist of a fitting body, clamping ring and union nut. The tubes to be connected are pushed through the pre-assembled connection into the fitting body as far as it will go and the union nut is tightened by hand. The union nuts are tightened with commercially available tools or with the CONEX wrench. In the process, the clamping ring deforms and forms the metallic sealing connection between the tube and the fitting.
>B< Press Fitting and >B< Press Gas Fitting
With the current >B< Press connection technology made of material copper and gunmetal, we offer another highly economical installation technology. >B< Press Fittings series P4000 and P5000 have been specially developed for the field of plumbing and heating installation and can also be used for many other applications. The >B< Press Fittings range includes over 300 different items in copper and gunmetal materials. The >B< Press Gas Fittings series PG4000 and PG5000 have the quality mark certificate no. G 2.692 for gas.
>B< Oyster
The high quality transition coupling >B< Oyster made of gunmetal allows a quick, clean and economical assembly of all screwed components with internal thread. Application in the fields of drinking water, rainwater, heating, oil-free compressed air and in industry. The cold and energy-independent connection technology is particularly suitable for installation in areas at risk of fire. >B<-Oysters are detachable and reusable.
Materials
Do you need finished parts according to drawings? Here, too, we are your competent supplier.
We offer you for example:
- electrodes and other accessories for resistance welding technology
- input material for die-cast pistons and finished pistons
- semi-finished products made of highly conductive copper-based materials for tool and mould construction
- parts made of refractory metals
Components from Elmedur
Our Elmedur materials are particularly versatile. We produce parts from them according to drawings - and of course also individual parts. All according to your wishes and requirements.
Electrodes
No matter which electrodes you need: Among our large selection of standard electrodes you will find the right one for your purposes. We manufacture electrodes from hardenable copper materials, which are very hard and at the same time highly conductive. They are ideal for applications in which high electrical currents are transmitted under high mechanical loads.
Wieland manufactures solid and hollow copper sections in a wide range of sizes. Featuring contours close to the final geometry, these sections help you obtain your finished parts in just a few operations. Together with you, we develop complex sections of copper from the draft to the initial prototypes to series production.
Materials
The Wieland WICONNEC brand offers a range of copper materials in the form of rods and wires that are ideal for machined sockets and pins for plug connectors. This material portfolio also offers brass materials in addition to specially developed copper alloys for complex turned plug connectors.
Wieland ecoline is our answer to enable your future business: the lead-free product line fulfills your individual needs for an efficient production and future oriented product development. And is, of course, compliant with the latest requirements of legislative directives on lead-free materials.
Learn more about
Wieland ecoline
From Europe’s largest copper alloy foundry in Vöhringen/Iller (Germany), we can offer you far in excess of a hundred different copper materials. These include not only a wide range of continuous castings like tubes and rods, but also shaped rods and sections of complex geometries. At the same time, our flexibility ensures the prompt realisation of your special custom wishes.
Materials
| Wieland | EN Designation | EN No. | ASTM UNS-No. | Dimensions |
|---|---|---|---|---|
| G05 | CuSn5Zn5Pb5-C-GC | CC491K | - | |
| G07/G08 | CuSn7Zn4Pb7-C | CC493K | - | |
| G10 | CuSn10-C | CC480K | - | |
| G12/G13 | CuSn12-C | CC483K | - | 10 – 354 mm |
| G12/G13 | CuSn12-C | CC483K | - | 10–354 mm |
| G12/G13 | CuSn12-C | CC483K | - | 22×22– 203×203 mm |
| G12/G13 | CuSn12-C | CC483K | - | 22 × 22 bis 203 × 203 mm |
| G12/G13 | CuSn12-C | CC483K | - | 22 × 12 bis 312 × 52 mm |
| G12/G13 | CuSn12-C | CC483K | - | 13 - 130 mm; on request |
| G12/G13 | CuSn12-C | CC483K | - |
We can offer you a wide range of materials, geometries, and surface qualities to choose from. Many geometries are available from our sheets stores.
Available materials
| Wieland | EN | EN-Nr. | UNS |
| K20 / K21 / K28 | Cu-DHP | CW024A | C12200 |
| L10 | CuNi10Fe1Mn | CW352H | C70600 |
| K65 | CuFe2P | CW107C | C19400 |
For a more sustainable future in construction.
With its 100 % share of recycled material, the cuprolife copper tube makes a sustainable difference, and thus makes a significant contribution to the advancement of building and construction as well as building services.
Every cuprolife tube from Wieland is manufactured in keeping with the mass balance approach – using a process with 100 % recycled copper. As the starting point when verifying cuprolife, TÜV SÜD tested the procedure for calculating the 100 % recycled content*.
The new standard in copper tubes: cuprolife®.
Thanks to cutting-edge manufacturing techniques, cuprolife tubes exceed even the highest requirements. Optimal efficiency and reliability are guaranteed along with an exceptional service life. cuprolife tubes are universally usable. cuprolife is permanently in stock and can be supplied in any size from 6 x 1 mm to 159 x 3 mm.
Fields of application
- Domestic hot and cold water supply
- Heating
- Gas
- Liquid gas
- Heating oil / biofuel oil B10
- Solar systems
- Rainwater
- Industrial compressed air
- Sprinkler systems
- Firefighting systems
Technical features
- 100 % recycled copper*
- Design according to EN 1057, quality assured
- Made of pure copper Cu-DHP
- With quality mark and DVGW certification: DV-7204AU2106 (6 to 159 mm outside diameter)
- Universal use in a range of finely differentiated dimensions
- Optimum availability and compatibility with a wide range of fittings
- Maximum operating temperature at 10 bar operating pressure: 250 °C (applies to dimensions up to DN 150)
- Fire resistance: EN 13501-1 – A1 (nonflammable)
- Dimensions according to DVGW GW 392 (6 to 159 mm) with closed tube ends
- For optimal drinking water hygiene
*Mass balance approach, based on ISO 14021, verified by TÜV SÜD.
Materials
cuprofrio.plus
Wieland branded copper tubes cuprofrio and cuprofrio.plus have a high level of internal cleanliness due to the individually closed tube ends and are suitable for refrigerants according to EN 12735-1.
cuprofrio tubes can be easily processed on site and conform to high quality standards with their extremely clean and dry inner surface. Close tube ends ensure the required quality even during storage and transportation.
learn more
cuprofrio.plus
cuprofrio.plus-tubes are insulated on the outside, which prevents nearly all water condensation on the outer surface of the tube.
Your benefits
- clean and dry inside surface
- standard dimensions available from stock
- good processing, easy joining, very easy to unwind and bend
- resistant, colour-fast insulation ensures consistent material properties in all weather conditions
- prevention of condensation water through insulating layer
- supplier traceability through signature
- compliance with Pressure Equipment Directive 97/23/EC
Fields of application
cuprofrio is suitable for technical gases and liquids, for example in
- chillers
- air-conditioning and refrigeration units
- heat exchangers
Materials
| Wieland | EN Designation | EN No. | ASTM UNS-No. |
|---|---|---|---|
| K20/K21/K28 | Cu-DHP | CW024A | C12200 |
Wieland can offer you wire and sectional made of a wide range of materials: wrought copper alloys and alloys extending from brass, both with and without lead, to bronze, to German silver. And in combination with material properties, sizes, and geometries, our delivery portfolio can meet virtually every requirement. Simply contact us!
Materials
Resources
Information material and important documents for download
8
result/s
Brochures
CaroTec & CaroRod
A perfect pairing for standards & low vacuum casting | wieland caro
1.21 MB
Brochures
CaroTec & CaroRod
Best Team for high vacuum die casting and structural parts | wieland caro
994.2 KB
Brochures
B Press Gas fitting
An innovative press system which provides a secure fitting for gas applications
282.03 KB
Brochures
Series 3000
A range of red brass threaded fittings.
255.45 KB
Brochures
Rules of procedure
Paper
1.6 MB
Terms and conditions
General Terms and Conditions
Wieland Kupral
461.26 KB
Terms and conditions
General Terms and Conditions of Purchase
Wieland Group
429.19 KB
Brochures
CaroBull & CaroBull-V
Quick and easy plunger tip concept | wieland caro
1.21 MB
Contact person
Get in touch - Your contact person at Wieland Kupral Kft.
Zsolt Kalmár
Managing Director
Wieland Kupral
+36 1 436 7150
Send email
Farkas János
Logistics
Wieland Kupral
+36 1 436 7150
Send email
Csók Katalin
Administration | Accounting
Wieland Kupral
+36 1 436 7150
Send email
Sándor István
Sales Plumbing tubes
Wieland Kupral
+36 1 436 7755
Send email
Tibai Veronika
Sales - Industrial alloys
Wieland Kupral
+36 1 436 7757
Send email
Deáki Szilvia
Sales - Industrial alloys
Wieland Kupral
+36 1 436 7766
Send email
Fischl Andrea
Sales industrial alloys
Wieland Kupral
+36 1 436 7756
Send email
Kegyes Jenő
Head of Warehouse & Logistics
Wieland Kupral
+36 1 436 7159
Send email
Gabor Vizhanyo
Extruded Products
Wieland Kupral
+36 1 436 7155
Send email
Imola Pál
Head of Finance
Wieland Kupral
+36 1 436 7150
Send email
Wieland Kupral Kft.
Kösöntyü u. 4.
1037 Budapest
Hungary
+36 1 436 7150
kupral@wieland.com
Managing Director:
Zsolt Kalmár
Registered office:
Budapest
Company no.:
01-09-070819
Tax no.:
10429288-2-41
Career
Start your career at Wieland Kupral Kft.
Unleash potential.
Already know your search term? Then go ahead and use our full text search. You will get a list of all relevant results.